Create a new method in your language called times print. this should be a void method. it should accept exactly two numeric values as input, x and y. inside the body, it should display text like, "the value of x times y is z," where z=x*y. it should accomplish no other tasks inside the body. call this method inside your main (or equivalent starting point) three times, each with different inputs. check that the program runs and the output matches what you expect. embed screenshots of the code and the program running.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to