Design a gui program to find the weighted average of four test scores. the four test scores and their respective weights are given in the following format: testscore1 weight1 for example, the sample data is as follows: 75 0.20 95 0.35 85 0.15 65 0.30 the user is supposed to enter the data and press a calculate button. the program must display the weighted average.

Select the correct answer. andre was recently hired by an organization to check for system vulnerabilities. he is supposed to exploit these vulnerabilities and create a report on the extent of damage to which the system was susceptible. what position does andre hold in this organization? a. information security analyst b. information assurance manager c. penetration tester d. network security engineer e. chief information security officer

What is the total resistance in a circuit that contains three 60 ohm resistors connected in a series? a. 20 ohms b. 120 ohms c. 60 ohms d. 180 ohms

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to