Create a sequential list with some data elements, and finish such operations as initialization, insertion, deletion etc. all operations should be implemented as independent functions, which can be called by the main function. (1) create a sequential list with data elements of 21, 18, 30, 75, 42, 56, and output all the elements (2) get the 3rd element of the list, and output the value; (3) insert 67 into the list at positon 3, and then output all the elements in the list;

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.