Avehicle fails an hc emission test at idle and 2,500 rpm, and the engine has an acceleration stumble. the heated oxygen sensor (ho2s) voltage is 0.1–0.3 volts on a scan tool, and the injector pulse width is high. no diagnostic trouble codes (dtcs) are found. when propane is directed into the air intake, ho2s voltage immediately increases and the injector pulse width decreases. the most likely cause of this problem is

a. a defective o2 sensor.
b. a defective powertrain control module (pcm).
c. low fuel-pump pressure.
d. an opening in the o2 sensor signal wire.

In a home that has 120 v service, there is an electric appliance that has a resistance of 12 ohms. how much power will this appliance consume? a. 10 w b. 120 w c 1200 w d. 1440 w

Which of the following best describe how the depth-limited search works. a normal depth-first search is performed but the number of ply/depths is limited. a normal breadth-first search is performed but the number of ply/depths is limited. a normal breadth-first search is performed but values above a specific value will be ignored. a normal depth-first search is performed but values above a specific value will be ignored.

Function name: poly parameters: int returns: int description: a polynomial of degree n with coefficients a0,a1,a2,a3, . . ,an is the function p(x) = a0+a1x+a2x2+a3 ∗ x3+ . . +an ∗ xn this function can be evaluated at different values of x. for example, if: p(x) = 1+2x+ x2, then p(2) = 1+2 ∗ 2+22 = 9. if p(x) = 1+x2+x4, then p(2) = 21 and p(3) = 91. write a function poly() that takes as input a list of coefficients a0, a1, a2, a3, . . , an of a polynomial p(x) and a value x. the function will return poly(x), which is the value of the polynomial when evaluated at x.