A student conducts an experiment to determine how the temperature of water affects the rate at which an
antacid tablet dissolves in the water. The student has
three antacid tablets of the same size and composition.
The student drops one tablet into each of three
beakers containing 200. milliliters of water at different
temperatures and measures the time it takes for each
tablet to completely dissolve. The results are shown in
the table below.

10.) What change, other than temperature, would
affect the rate of dissolving?

The answer to your question really depends on three things: how much water you have, how cold it is to start out, and how cold the things around it are. water actually freezes when it gets to 32 degrees fahrenheit (0 degrees celsius), but the time it takes to get there may be different.  let's start with the first. if you take two glasses, and fill one with a tiny bit of water, and the other about halfway, then put them both in the freezer, the one with less water will freeze first (you can try this at home, but i recommend using plastic cups and not glass ones).  now let's move on to the second part. let's say you have two glasses, and you fill one with really cold water that has been in the refrigerator, and the other with really hot water from the sink. if you put both of them in the freezer, the one that started out colder will freeze first.  for the third part, let's imagine that you have two glasses with the same amount of water in them, and the water is at the same temperature. imagine putting one outside on a really really cold day in georgia, and having a friend in alaska put one outside on the same day. since it would be so much colder in alaska, the glass of water there would freeze before yours.  so, if you took a tiny bit of really cold water in a glass, and put it outside on a cold day in alaska, it would freeze a lot faster than a big glass of hot water outside on a cold day in georgia. 

The answer you are looking for is option d

Answer

it is the minimum amount of material needed to sustain a fission reaction.

explanation

critical mass is the minimum amount of fissionable material that must be assembled for a sustained fission reaction to take place. although two to three neutrons are produced for every fission, not all of these neutrons are available for continuing the fission reaction. if the conditions are such that the neutrons are lost at a faster rate than they are formed by fission, the chain reaction will not be self-sustaining.   at the point where the chain reaction can become self-sustaining, this is referred to as critical mass.