Chemistry, 12.08.2019 23:30 tlecuyer

Fluoridation is the process of adding fluorine compounds to drinking water to fight tooth decay. a concentration of 1 ppm of fluorine is sufficient for the purpose (1 ppm means one part per million, or 1 g of fluorine per 1 million g of water). the compound normally chosen for fluoridation is sodium fluoride, which is also added to some toothpastes. calculate the quantity of sodium fluoride in kilograms needed per year for a city of 50,000 people if the daily consumption of water per person is 150 gal. what percent of the sodium fluoride is "wasted" if each person uses only 6.0 l of water a day for drinking and cooking (sodium fluoride is 45.0 percent fluorine by mass; 1 gal= 3.79 l; 1 year =365 days; 1 ton =2000 lb; 1 lb =453.6g; density of water =1.0 g/ml)?

Answers: 2

Show answers

Another question on Chemistry

Chemistry, 22.06.2019 01:40

Which characteristic of water it form droplets? a. low specific heat b. nonpolar structure c. high surface tension d. ability to dissolve substances

Answers: 1

Answer

Chemistry, 22.06.2019 04:40

Listen base your answer to the question on the information below.propane is a fuel that is sold in rigid, pressurized cylinders. most of the propane in a cylinder is liquid, with gas in the space above the liquid level. when propane is released from the cylinder, the propane leaves the cylinder as a gas. propane gas is used as a fuel by mixing it with oxygen in the air and igniting the mixture, as represented by the balanced equation below.c3h8(g) + 5o2(g) → 3co2(g) + 4h2o() + 2219.2 kja small amount of methanethiol, which has a distinct odor, is added to the propane to consumers detect a propane leak. in methanethiol, the odor is caused by the thiol functional group (–sh). methanethiol, ch3sh, has a structure that is very similar to the structure of methanol.what is the correct structural formula for a molecule of methanethiol

Answers: 3

Answer

Chemistry, 22.06.2019 05:30

Astudent carefully transfers 30 g of water and 30 g of alcohol in a glass tube, forming two layers and filling the tube completely. after sealing the tube, the student mixes the solutions, and notices a bubble that forms in the tube. what is the mass of the contents in the glass tube after mixing?

Answers: 2

Answer

Chemistry, 22.06.2019 17:10

)benzene and toluene form nearly ideal solutions. consider an equimolar solution of benzene and toluene. at 20 °c the vapour pressures of pure benzene and toluene are 9.9 kpa and 2.9 kpa, respectively. the solution is boiled by reducing the external pressure below the vapour pressure. calculate (i) the pressure when boiling begins, (ii) the composition of each component in the vapour, and (iii) the vapour pressure when only a few drops of liquid remain. assume that the rate of vaporization is low enough for the temperature to remain constant at 20 °c.

Answers: 1

Answer

You know the right answer?

Fluoridation is the process of adding fluorine compounds to drinking water to fight tooth decay. a...

Questions