Phthalic acid has a solubility of approximately 18g per 100 ml of water at 100°c and 0.62g per 100 ml of water at 25°c. what is the minimum volume of water needed to recrystallize 50 mg of phthalic acid? how much phthalic acid will remain in solution after recrystallization?

If Phthalic acid has a solubility of approximately 18g per 100 ml of water at 100°c and 0.62g per 100 ml of water at 25°c.

∴

The minimum volume of water needed to recrystallize 50 mg of phthalic acid is 0.28 mL.

Also, the amount of phthalic acid remaining after the solution recrystallizes is 48.264 g.

From the parameters given:

At 100° C, if 100 mL could dissolve 18 g Phthalic acid;

∴

1 mL of water will be able to dissolve = (1 mL × 18 g)/100 mL

= 0.18 g of phthalic acid.

Thus, the minimum volume to dissolve 50 mg of phthalic acid would be:

x = (0.05 g × 100 mL)/18 g

x = 0.28 mL

It implies that 0.28 mL will be the minimum volume to dissolve 50 mg of phthalic acid when it cools before it starts to recrystallize.

Similarly, at 25° C, 0.62 g was able to be dissolved in 100 mL of water.

∴

1 mL of water will be able to dissolve = (1 mL × 0.62 g)/100 mL

= 0.0062 g of phthalic acid.

= 6.2 mg of phthalic acid

Thus,

0.28 ml of water from the 50 mg of phthalic acid will be able to dissolve:

= (6.2 mg × 0.28 mL)/1 mL

= 1.736 mg

This implies that the moment the phthalic acid crystalize from the solution;

1.736 mg was able to be dissolved and the remaining amount of phthalic acid undissolved after recrystallization is:

= 50 mg - 1.736 mg

= 48.264 mg

Therefore, we can conclude that the minimum volume of water needed to recrystallize 50 mg of phthalic acid is 0.28 mL and the amount of phthalic acid remaining after the solution recrystallizes is 48.264 g.

Learn more about recrystallization here:

link

The minimum volume of water needed is 0.28 mL. The solution will have

1.7 mg of phthalic acid remaining in solution.

At 100 °C

Volume of water required = 50 mg HPh × (100 mL water/18 000 mg HPh)

= 0.28 mL water

At 25 °C

Mass of HPh in solution = 0.28 mL water × (620 mg HPh/100 mg water)

= 1.7 mg HPh

a boiling water reactor does not boil the water. a pressurized water reactor boils the water faster. a pressurized water reactor is heated directly by the core. a pressurized water reactor does not use fission.