You have a workstation connected to a small branch network using a single switch. the network does not have any routers and is no connected to the internet. what are the minimum configuration parameters required on the workstation to be able to communicate with all hosts on the network?

Add the mips assembly language instructions (after main: ) to complete the following (in this order). do not skip steps. use other registers as needed. actions: 1. initialize the register $s0 to 35 2. prompt the user to enter a number, read the number and then put it into register $s1 3. prompt the user to enter a number, read the number and then put it into register $s2 4. store the value in $s1 into the memory at address 0x10010000. 5. store the value in $s2 into the memory at address 0x10010004. 6. calculate the value of $s0 - $s1 $s2 and store the result in the memory at address 0x10010008. 7. print the following output each on its own line. you will need to determine the location of each of the strings from the beginning of the memory segment a. your name b. the value in address 0x10010000 c. the value in address 0x10010004 d. the value in address 0x10010008 8. exchange or swap the values in $s1 and $s2 9. set the value in $s0 to -$s0

Use this image to answer the following question. when the economy is operating at point b, the us congress is most likely to follow

Jewelry manufacturers produce a range of products such as rings, necklaces, bracelets, and brooches. what fundamental economic question are they addressing by offering this range of items?