(answer accordingly and explain how or why you think it’s the answer. (provide the math behind it, etc.) i’m not the best at these type of logic questions so would be appreciated! )
1. quickfence ltd has the following method for calculating the price it will charge to put up a new fence:
• labour is charged at $25 per hour, or part of an hour. it takes 45 minutes of labour per metre to put up a new fence.
• fence panels are 2 m long and cost $20 each. if they have to be cut, the price of a full panel is charged.
• fence posts cost $5 each. a post is needed between fence panels and at both ends.
what will be the price for a fence 13 m long?
2. a farmer is planning to create a temporary ‘pen’ for livestock, by cutting a large section of plastic netting into strips, joining the strips together and then fixing the combined length to posts. he decides the fence must be 2 m high, and must form a shape that is nearly square: either a precise square or a rectangle whose length and width do not differ by more than 5 m.
if the length and width are both whole numbers of metres, what is the greatest area than can be created from 156 m2 of netting?

1. the or shop owner initiates the repair order. a. service manager b. foreman c. customer d. service consultant student a incorrect reference: section 5.1 2. the repair order is routed to the who computes the bill based on information supplied by the technician and shop policy. a. service manager b. foreman c. service consultant d. accountant student c incorrect reference: section 5.1 8. is used in windshield washer fluid to prevent freezing and dissolve bugs. a. propanol b. brake fluid c. alcohol-additive (methanol) d. ethylene glycol student a incorrect reference: section 5.3 9. all of these acts are performed when doing an oil and filter change except a. lifting the vehicle to your best working height. b. putting the drain pan under the oil-drain plug. c. using safety glasses with side shields. d. loosening the drain plug with a screwdriver. student c incorrect reference: section 5.2 10. coolant should be clear, not clouded from contamination, and should feel a. slippery. b. hot. c. cool. d. sticky. student c incorrect reference: section 5.3 11. the device in the above photo is used to check the coolant a. level. b. acid level. c. temperature. d. thickness. student c incorrect reference: section 5.3 14. some vehicles require the use of a to check the level of the fluid. a. scan tool b. micrometer c. feeler gauge d. manometer student d incorrect reference: section 5.3 17. the type of oil used in a vehicle is determined by the oem specifications and the oil which is listed in the owner’s manual, online service information, and on the oil fill cap. a. pressure b. viscosity c. density d. type student c incorrect reference: section 5.2 18. one of the first jobs a new technician does in the shop is a. tire service. b. transmission work. c. lubrication service. d. front-end work. student a incorrect reference: section 5.2 plzzz